Excellent quality with excellent elasticity and softness characteristics, suitable for the protection of parts subject to severe wear. Coatings of rollers, hoppers, metal walls, high quality bibs, screens etc.
COLOUR: BLACK
SPECIFIC WEIGHT: GR / CM3 1.15
HARDNESS: SHORE A55
BREAKING LOAD: KG / CM2 155
ELONGATION AT BREAK:% 500
RESISTANCE TO ABRASION: mm ABRASI 90
THERMAL EXCURSION: -30 +80 ° C
AVAILABLE THICKNESS: FROM mm3 TO mm50
PRESENTATION: SMOOTH SURFACES
Quality suitable for contact with non-greasy and non-oily food substances.
Particularly suitable for: flours and flours, grains, pasta, bread etc ..
ITALY: Ministerial Decree OF 4/4/1985 AND SUBSEQUENT CHANGES
GERMANY: BGA CLASS 1 UNITED STATES: FDA 177-2600
COLOR: WHITE / RED
SPECIFIC WEIGHT: GR / CM3 1.45
HARDNESS: SHORE AT 60
BREAKING LOAD: KG / CM2 80
ELONGATION AT BREAK:% 500
THERMAL EXCURSION: -30 +90 ° C
AVAILABLE THICKNESS: FROM mm1 TO mm50
PRESENTATION: SMOOTH SURFACES
Colored economic quality, suitable for general uses that require the use in contact with products with aesthetic and cleaning requirements. It is suitable for water, saline solutions, weak acids.
COLOR: WHITE / RED
SPECIFIC WEIGHT: GR / CM3 1.60
HARDNESS: SHORE AT 65
BREAKING LOAD: KG / CM2 50
ELONGATION AT BREAK: 250%
THERMAL EXCURSION: -25 +70 ° C
AVAILABLE THICKNESS: FROM mm1 TO mm50
PRESENTATION: SMOOTH SURFACES
Economic quality suitable for general uses where no particular physical-mechanical specifications are required, resistance to heat, chemical agents or aging. It is suitable for water, saline solutions, weak acids.
COLOUR: BLACK
AVAILABLE THICKNESSES: mm 1-1.5-2-2.5-3-3.5-4-5-6 WITH 1 CANVAS mm 3-3.5-4-5-6-8-10-12-15 -20 WITH 2 CANVAS FROM 25 TO 50 MM THE NUMBER OF CANVAS VARY ACCORDING TO REQUEST
PRESENTATION: SMOOTH SURFACES
Qualities based on synthetic ethylene-propylene terpolymer with excellent resistance to atmospheric and chemical agents.
COLOUR: BLACK
SPECIFIC WEIGHT: GR / CM3 1.28
HARDNESS: SHORE A70
BREAKING LOAD: KG / CM2 100
ELONGATION AT BREAK: 350%
THERMAL EXCURSION: -40 +120 ° C
AVAILABLE THICKNESS: FROM mm1 TO mm50
Qualities based on synthetic ethylene – propylene copolymer rubber (DUTRAL) which has superior technical notes and performance superior to type 70 / M. Excellent resistance to heat, atmospheric agents, ozone and chemical agents.
COLOUR: BLACK
SPECIFIC WEIGHT: GR / CM3 1.16
HARDNESS: SHORE A75
BREAKING LOAD: KG / CM2 120
RESISTANCE TO ABRASION: mm3 ABRASI 130
ELONGATION AT BREAK:% 310
THERMAL EXCURSION: ° C -45 +140
AVAILABLE THICKNESS: FROM mm1 TO mm50
PRESENTATION: SMOOTH SURFACES
Nitrile rubber quality with moderate physical-mechanical characteristics, suitable for use in contact with mineral and animal oils and fats, fuels and gasolines (with a content of aromatic substances not exceeding 20%), as well as for liquefied gases at room temperature.
COLOUR: BLACK
SPECIFIC WEIGHT: GR / CM3 1.40
HARDNESS: SHORE A70
BREAKING LOAD: KG / CM2 80
ELONGATION AT BREAK:% 300
RESISTANCE TO LACERATION: KG / CM2 18
THERMAL EXCURSION: -30 +90 ° C
AVAILABLE THICKNESS: FROM mm1 TO mm50
PRESENTATION: SMOOTH SURFACES
Quality of natural rubber, with a high degree of elasticity and softness, excellent mechanical resistance and moderate behavior in the presence of atmospheric agents, acids and weak alkalis.
COLOUR: BEIGE
SPECIFIC WEIGHT: GR / CM3 1.05
HARDNESS: SHORE A42
BREAKING LOAD: KG / CM2 220
ELONGATION AT BREAK:% 500
RESISTANCE TO ABRASION: mm ABRASI 90
THERMAL EXCURSION: -40 +70 ° C
FRAGILITY LIMIT: -60 ° C
AVAILABLE THICKNESS: FROM mm1 TO mm50
PRESENTATION: SMOOTH SURFACES
Quality commonly used for the protection and coating of metal walls in sandblasting chambers. Suitable to withstand repeated stresses (bending, vibrations, tractions) and high loads with minimal residual deformation.
COLOUR: BLACK
SPECIFIC WEIGHT: GR / CM3 1.20
HARDNESS: SHORE A60
BREAKING LOAD: KG / CM2 155
ELONGATION AT BREAK:% 500
RESISTANCE TO ABRASION: mm ABRASI 90
THERMAL EXCURSION: -30 +80 ° C
AVAILABLE THICKNESS: FROM mm1 TO mm50
PRESENTATION: 1 SMOOTH SIDE – 1 SIDE CANVAS IMPRESSION
Economic quality suitable for general uses where no particular physical-mechanical specifications are required, resistance to heat, chemical agents or aging. It is suitable for water, saline solutions, weak acids.
COLOUR: BLACK
SPECIFIC WEIGHT: GR / CM3 1.50
HARDNESS: SHORE AT 65
BREAKING LOAD: KG / CM2 60
ELONGATION AT BREAK: 250%
THERMAL EXCURSION: -20 +70 ° C
AVAILABLE THICKNESS: FROM mm1 TO mm100
PRESENTATION: SMOOTH SURFACES